Sindoh 3DWOX PLA Filament Refill

Delivers within 6 business days!

Compatible with 3DWOX 1, 1X, 2X and 7X

Only Sindoh genuine filaments that are tested and certified by Sindoh's Lab (such as these) ​are recommended for the best quality of print output. 

*1.5 kg PLA available for the 7X in Blue and White.

PLA

PLA (Poly-lactic Acid or polylactide) has easy print-ability which makes it widely used in 3D printing. In fact, it's the most commonly used material in 3D printing. PLA is roughly 70 ~ 80% stronger than ABS filament and can be deformed at high temperatures. It's a thermoplastic aliphatic polyester derived from renewable biomass, typically from fermented plant starch such as from corn, cassava, and sugarcane. PLA has the second highest consumption volume of any bio-plastic in the world.

PLA is used as medical implants in the form of anchors, screws, plates, pins, rods, and as a mesh PLA can also be used as a decomposable packaging material, either cast, injection-molded, or spun. Cups and bags have been made from this material.

In the form of a film, it shrinks upon heating, allowing it to be used in shrink tunnels.

It is useful for producing loose-fill packaging, compost bags, food packaging, and disposable tableware. In the form of fibers and non-woven fabrics, PLA also has many potential uses - for example, as upholstery, disposable garments, awnings, feminine hygiene products, and diapers.

The melting point of ​PLA is around 180°C and unlike ABS, it does not shrink easily even when the temperature decreases, so it is possible to print variety of designs relatively stable and easy.​ 

When will I need this?

If the filament in the cartridge runs out, you can get this Refill Filament spool to refill it. 

You can simply refill the filament by replacing the filament spool inside the cartridge and the smart chip inserted on the cartridge.

If you use a cartridge too long, the filament feeding rubber roller of the cartridge can be worn out and may cause a filament feeding problem. If so, you may purchase a new cartridge.​

How do I replace the filament spool?

Please check whether your cartridge is A type or B type. Then, follow the instructions on the below manual according to your cartridge type to ​proceed spool replacement. 

A Type | A Type Cartridge Manual

B Type | B Type Cartridge Manual